Next: Example Models Up: Error Messages Previous: Error Message Logging
Next: Example Models
Up: Error Messages
Previous: Error Message Logging
The following errors/warnings arise from incorrectly defined FEMGEN data. The interface will attempt to continue processing the model in order to detect as many such errors as possible.
ERROR: 2D OR AXI ELEMENT WITH NON-ZERO Z ON PART Part_name
ERROR: BRANCHING IN RIGID SURFACE Set_name
ERROR: BRANCHING IN SLIDE LINE Set_name
ERROR: CANNOT FIND MID-FACE NODE FOR INTER9 ELEMENTS ON PART Part_name
ERROR: CANNOT FIND MID-FACE NODE FOR IRS9 ELEMENTS ON PART Part_name
ERROR: GAP(S) IN RIGID SURFACE Set_name
ERROR: GAP(S) IN SLIDE LINE Set_name
ERROR: INCOMPATIBLE LOAD/PART TYPE FOR LOAD Load_name
ERROR: INCORRECT BEAM PROPERTIES FOR PART Part_name
ERROR: INCORRECT DOF FOR CONSTRAINT Constraint_name
ERROR: INCORRECT ELEMENT VARIANT ON PART Part_name
ERROR: INCORRECT ELEMENT VARIANT ON SET Set_name
ERROR: INCORRECT GAP TYPE IDENTIFIER (IDOF1) FOR GAP Gap_name
ERROR: INCORRECT OR MISSING NODE DATA FOR GAP Gap_name
ERROR: INCORRECT PROPERTIES ON PART Part_name
ERROR: INCORRECT PROPERTIES ON RIGID SURFACE SET Set_name
ERROR: INCORRECT PROPERTIES ON SLIDE LINE SET Set_name
ERROR: INVALID CENTRIFUGAL LOAD Load_name
ERROR: INVALID DEGREE OF FREEDOM INDICATOR FOR LOAD Load_name
ERROR: INVALID ELEMENT VARIANT IN RIGID SURFACE Set_name
ERROR: INVALID ELEMENT VARIANT IN SLIDE LINE Set_name
ERROR: INVALID HYDROSTATIC PRESSURE LOAD Load_name
ERROR: INVALID LINE TYPE(S) IN RIGID SURFACE Set_name
ERROR: INVALID LOAD NAME FOR LOAD Load_name
ERROR: INVALID MATERIAL TYPE FOR MATERIAL Material_name
ERROR: INVALID PART TYPE FOR LOAD Load_name
ERROR: INVALID START POINT(S) FOR RIGID SURFACE Set_name
ERROR: LOCAL SYSTEM INCONSISTENT WITH GAP TYPE FOR GAP Gap_name
ERROR: MISSING MATERIAL FOR PART Part_name
ERROR: MISSING PROPERTIES FOR PART Part_name
ERROR: MISSING PROPERTIES ON RIGID SURFACE SET Set_name
ERROR: MISSING PROPERTIES ON SLIDE LINE SET Set_name
ERROR: MIXED ELEMENT TYPES/PROPERTIES ON SET Set_name
ERROR: MORE THAN ONE RIGID BODY REFERENCE NODE FOR RIG-SURF Set_name
ERROR: NO ELEMENTS FOUND FOR RIGID SURFACE Set_name
ERROR: NO ELEMENTS ON PART FOR LOAD Load_name
ERROR: NO GAP LOCAL SYSTEM FOUND FOR GAP Gap_name
ERROR: NO NODES FOUND FOR CONSTRAINT Constraint_name
ERROR: NO NODES FOUND FOR LOAD Load_name
ERROR: NO RIGID SURFACE ELEMENTS IN RIGID SURFACE Set_name
ERROR: NO SLIDE LINE ELEMENTS IN SLIDE LINE Set_name
ERROR: NON-ZERO Z-COORDINATE IN RIGID SURFACE Set_name
ERROR: UNABLE TO DETERMINE LOADED FACE FOR LOAD Load_name
ERROR: UNABLE TO MAP CONSTRAINT TO ABAQUS MPC Constraint_name
ERROR: INVALID MPC DEFINITION FOR CONSTRAINT Constraint_name
ERROR: MESH REFINEMENT MPC NOT SUPPORTED FOR CONSTRAINT Constraint_name
ERROR: PART1 MUST NOT BE A SET FOR CONSTRAINT Constraint_name
ERROR: INCOMPLETE RESULT OUTPUT REQUEST FILE
ERROR: RESULT OUTPUT REQUEST LIMIT EXCEEDS Integer
WARNING: RESERVED ENTITY NAME DETECTED: Entity_name
The following errors relate to the interface's use of files. They are often an indication that mid-way through the translation process a file has either been closed, deleted, or locked by some external source or via a hardware fault. For the external material, physical and results files an incorrectly defined resource can cause the interface to search for files in the wrong area. These errors will cause the interface to terminate immediately.
ERROR: FORTRAN WRITE ERROR ON INPUT FILE CHANNEL Integer
ERROR: FORTRAN WRITE ERROR ON LOG OR HISTORY FILE
ERROR: UNABLE TO OPEN EXTERNAL MATERIAL FILE Filename
ERROR: UNABLE TO READ EXTERNAL MATERIAL FILE Filename
ERROR: UNABLE TO OPEN RESULT OPTIONS FILE Filename
ERROR: OPENING *AMPLITUDE INPUT FILE Filename FOR TIME CURVE Timecurve_name
ERROR: WRITING *AMPLITUDE INPUT FILE Filename FOR TIME CURVE Timecurve_name
ERROR: OPENING ADDITIONAL INPUT FILE Filename
ERROR: WRITING ADDITIONAL INPUT FILE Filename
The following errors can occur with very large models (40,000+ Nodes/Elements). Under such circumstances please consult your local FEMGEN/FEMVIEW distributor in order to increase the interface limits. The interface will terminate immediately.
ERROR: DUMMY ARRAY OVERFLOW IN GAABAQ, CURRENT SIZE Integer
ERROR: LOADCASE ARRAY OVERFLOW IN DLABAQ, CURRENT SIZE Integer
ERROR: LOADCASE NUMBER EXCEEDS LIMIT OF Integer
ERROR: LOCAL ARRAY OVERFLOW IN S3ABAQ, CURRENT SIZE Integer
ERROR: NUMBER OF GAP ELEMENT LOCAL AXIS SYSTEMS EXCEEDS Integer
ERROR: NUMBER OF GENERATED NODES FOR INTER9S EXCEEDS LIMIT OF Integer
ERROR: NUMBER OF NODES IN GAP DEFINITION EXCEEDS LIMIT OF Integer
ERROR: NUMBER OF RIGID SURFACES EXCEEDS LIMIT OF Integer
ERROR: NUMBER OF SLIDE LINES EXCEEDS LIMIT OF Integer
ERROR: RESULT OPTIONS FILE EXCEEDS LINE LIMIT OF Integer
ERROR: RESULT OUTPUT REQUEST LIMIT EXCEEDED Integer
ERROR: TOO MANY LINES IN RIGID SURFACE Integer
ERROR: TOO MANY LINES IN SLIDE LINE Set_name
ERROR: TOO MANY NODES IN SLIDE LINE Set_name
ERROR: WORK ARRAY OVERFLOW IN CEABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN CFABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN COABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN CXABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN DEABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN DFABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN DIABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN ESABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN FEABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN FLABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN FOABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN GAABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN GRABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN HEABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN HYABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN ICABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN LAABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN LOABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN M2ABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN MFABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN MPABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN NCABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN NSABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN PRABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN PVABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN RAABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN RBABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN S3ABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN SPABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN SRABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN SUABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN TCABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN TEABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN VAABAQ, CURRENT SIZE Integer
ERROR: WORK ARRAY OVERFLOW IN VEABAQ, CURRENT SIZE Integer
Femsys Limited