Next: Elements With Beam Section Up: Property Definitions Previous: Elements Without Physical Properties
Next: Elements With Beam Section
Up: Property Definitions
Previous: Elements Without Physical Properties
The elements in Table 3.2 should be assigned a single thickness/area value defined thus:
PROPERTY PHYSICAL THICKNES [propname] value
A single offset value can be defined for shell elements thus:
PROPERTY PHYSICAL THICKNES [propname] OFFSET value
| ELEMENT | ||||||
| TYPE | ABAQUS Element Names | |||||
| Two Dimensional | CPE3 | CPE3H | CPS3 | DC2D3 | M3D3 | |
| Continuum and | AC2D4 | CPE4 | CPE4H | CPE4R | CPE4RH | |
| Membrane | CPS4 | CPS4R | DC2D4 | M3D4 | M3D4R | |
| CPE4T | CPE4HT | CPS4T | CPE6 | CPE6H | ||
| CPS6 | DC2D6 | M3D6 | CPE8R | AC2D8 | ||
| CPE8 | CPE8H | CPE8P | CPE8PH | CPE8R | ||
| CPE8RH | CPE8RP | CPE8RPH | CPE8RT | CPE8T | ||
| CPS8 | CPS8R | CPS8RT | CPS8T | DC2D8 | ||
| M3D8 | M3D8R | CPE8HT | CPE8RHT | M3D9 | ||
| M3D9R | CPE3E | CPS3E | CPE4I | CPE4IH | ||
| CPS4I | CPS4IH | DCC2D4 | DCC2D4D | CPE4E | ||
| CPS4E | CINPE4 | CINPS4 | CPE6E | CPS6E | ||
| CPE8E | CPE8RE | CPS8E | CPS8RE | CINPE5R | ||
| CINPS5R | CPS6M | CPE6M | CPE6MH | MAX1 | ||
| MAX2 | MGAX1 | MGAX2 | CPE4P | CPE4PH | ||
| Shell | SAX1 | SAX2 | SAX2T | STRI3 | STRI35 | |
| DS4 | S4R | S4R5 | STRI65 | DS8 | ||
| S8R | S8R5 | S8RT | S9R5 | SAXA1N | ||
| SAXA2N | S3RF | S4RF | S3R | S4 | ||
| S3 | DS3 | DS6 | S4RS | S3RS | ||
| S4RSW | ||||||
| Link and | AC1D2 | C1D2 | C1D2H | C1D2T | DC1D2 | |
| Truss | AC1D3 | C1D3 | C1D3H | C1D3T | DC1D3 | |
| DCC1D2 | DCC1D2D | C1D2E | DCCAX2 | DCCAX2D | ||
| C1D3E | T2D2 | T2D2H | T3D2 | T3D2H | ||
| T2D2T | T3D2T | T2D2E | T3D2E | T2D3 | ||
| T2D3H | T3D3 | T3D3H | T2D3T | T3D3T | ||
| T2D3E | T3D3E | |||||
| Acoustic | ASI2 | ASI3 | ASI1 | |||
| Interface | ||||||
| Rigid Body | RIGID2 | R2D2 | RB2D2 | RB3D2 | RAX2 | |
| R3D3 | R3D4 | |||||
| Fluid | F2D2 | |||||
Femsys Limited