9.2 Problem description
It is required to model a tensile test specimen made of steel as shown in figure 9.1. Load of 100 KN will be applied at one and the other end will be restrained in X, Y, and Z translation.
Figure 9.1: Tensile test specimen
![[Next]](802503c4.gif){kind=small}
![[Up]](80000658.gif){kind=small}
![[Previous]](ff57198c.gif){kind=small}
![[Contents]](a5f4558b.gif){kind=small}
![[00i.bmp]](00000012.gif)