HOME| TEXT| GRADING | STAFF | DEMOS | LECTURES | LABS| ELECTRONICS| PROGRAMS

DyVal

Schematics:

bullet Hook-up for DyVal Model 23-5030 Air valve 
bulletController board schematic
bulletSee Radd for controller board manual

Valve:

DyVal Model 10-1100 (20 ohms / 200 mA)  We will consider the plate as the front view. We apply about 70 PSI of dry air to the back port.  The valve will portion out the air between the left and right ports.  Air returning from the left and right ports will be exhausted to the front port.  (left view) The cannon plug from the DeVal 23-5030 controller board will plug into the electrical housing at the top.  (top view)
Two electro-magnets move the bar very slightly.  A connecting rod attached to the bar will move a piston in the valve body.  (underneath the electrical cover) Here's the right cover off to show the connecting rod, bore and piston.  (right view) The piston will meter the air flow to the proper ports.  Here we see the valve body removed from the base diverter plate.

Last Modified: 12/01/04
MAE433 WEBMASTER

[ MAE224 ] [ MAE412 ]